Screw Snacks Making Machinery-manufacture,factory,supplier from China

Twin screw extruder is developed on the basis of single screw extruder. Two screws are placed side by side in the barrel of the twin screw extruder. According to the meshing degree of the two screws can be divided into mutual meshing type and non-meshing type. According to the rotation direction of the two screw shafts, it can be divided into reverse rotation type and co-rotation type.(1) meshing twin screw: Because the meshing gap of the meshing screw is very small, the material has the ability of forced conveying, not easy to produce backflow, leakage phenomenon.

Extrusion technology, as an economical and efficient processing method, has been widely used in food and feed industry in recent years. The twin screw extruder has incomparable advantages over the single screw extruder. Its advantages such as wide processing range, high curing, strong self-cleaning ability and stable operation control are gradually recognized by everyone. For the food industry with high requirements, these advantages of twin screw extruder can be better played.

As October approaches, konjac also ushered in the harvest season. The suitable planting areas of konjac in my country are mainly distributed in the tropical and subtropical humid monsoon climate regions such as the Southeast Mountains, the Yunnan-Guizhou Plateau, and the mountains around the Sichuan Basin.Konjac has been cultivated and eaten in my country for a long time. The processed products of konjac are not limited to the konjac tofu that people often eat in the past. Konjac has been processed into various snacks and snacks, which are deeply loved by consumers.

In the past, "I know the taste of the sea" once made bagged instant seaweed snacks deeply rooted in the hearts of the people, basically opening a new era of cross-generational development of seafood snacks. With the accelerated development of my country's "deep blue economy" in recent years, the use of new food processing technologies and new processes to vigorously develop marine leisure food in the true sense has become an important direction for the development of the marine product industry. Grilled fish fillets, cod sausages, etc.

There are many kinds of raw materials and products in the food industry, and the processing technology is different, so the mechanical equipment of food enterprises is also very complicated.Raw material processing machinery: including decontamination, cleaning, selection and other mechanical equipment.Crushing and cutting, dividing machinery: including crushing, crushing, grinding, dividing, cutting and other mechanical equipment.Mixing machinery: including powder mixing machinery and equipment.Sorting machinery: refers to the sorting machinery of powder and block materials.Molding machinery:

For a long time, hawthorn has mostly been familiar to people in the form of snacks such as hawthorn slices, hawthorn strips, and hawthorn cakes. With the rapid development of society and economy, it has naturally become the childhood memory of many people, and the market development has certain limitations. With the trend of "food and nourishment" in the industry, hawthorn with dual-use value of food and medicine is considered to have broad development prospects.

Food machinery refers to the mechanical equipment and devices used in the process of processing food raw materials into food (or semi-finished products).

For a long time in the past, the impression of dehydrated vegetables was basically vegetable packets in instant noodles. Although its application to the "black technology" used in aerospace food - freezing and dehydrating vegetables technology ensures the flavor and nutrition of vegetables, after all, the supply of fresh vegetables in China is relatively sufficient, and people rarely choose dehydrated vegetables in their daily life. food. However, over the years, this situation has changed.

There is only one screw in the barrel of the single screw extruder, it is by the friction of the screw and the barrel of the material to transport materials and form a certain pressure. In general, the friction coefficient between the material and the barrel is greater than that between the material and the screw. Otherwise, the material will be wrapped in the screw together to rotate and not play the role of forward propulsion.Screw is divided into three sections: feeding (feeding) conveying section, compression melting section, metering homogenization section.

When operating a twin-screw extruder, it should be maintained on time. The maintenance process is carried out after the twin-screw extruder runs continuously for 2500-5000h and shuts down. The screw is extracted to inspect, measure and identify the wear condition of the most critical components, replace the components that have reached the specified wear limit as soon as possible, and repair the damaged components . The maintenance standard of the reducer of the twin-screw extruder is the same as that of the ordinary standard reducer.