extrusion frying machine-manufacture,factory,supplier from China

(Total 24 Products for extrusion frying machine)
Frying machine using advanced oil and water integration technology, to overcome the shortcomings of the traditional frying machine, automatic filtration, can maintain the clean frying oil, the consistency of the letter fried products, not only improve the quality of products, extend the shelf life, but also bring higher added value for products.Due to the characteristics of cooking oil, when the temperature reaches 360 to 366 degrees Celsius, the oil in the pan starts to spontaneously ignite, and the temperature reaches 400 degrees Celsius for a short time.
  Contact Now
Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.
  Contact Now
Breadcrumb is mainly used for fried beefsteak and chicken as frying dressing. this line is especially designed and developed to perform from the fabric to very last shaping routinely with less manpower, with out waste,lower production price, and higher manufacturing efficiency.
  Contact Now
Equipment introductionThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles.  This complete set of equipment integrates the functions of frying, conveying, oil filtering and seasoning, and the control is accurate and reliable.  The equipment is frying while conveying, with strong continuous production without interruption, which greatly improves production efficiency and saves a lot of human resources.  Frying oil turnover rate is high.  The pot body and the conveying can be separated freely, which is
  Contact Now
This method line is newly designed and produced with foreign places advanced era. it has improved the dangers of import tool which consist of huge funding and immoderate manufacturing fee. this line uses corn starch, wheat flour, potato starch as materials to deliver"bugles", "net", "potato chips" and hundreds of numerous 3-d compound extrusion meals. this line can be in assessment with those import equipments. under the same capabilities, its price is high-quality one tenth of that of import machine.
  Contact Now
Crumb is mainly used for fried beefsteak and chicken as frying dressing.
  Contact Now
Extruded pasta/pasta production line generally uses special flour as raw material, its production process includes mixing, extrusion curing, molding, cutting, drying, etc., the equipment is automatically controlled, to achieve automatic production line. Its products include extruded noodles such as knife-cut noodles (an upgrade of instant noodles), various shapes of pasta (such as hollow tubes, shell shape, rice grain shape, etc.);The production line is flour, corn starch, potato starch as raw materials, after extrusion, curing, forming, drying, frying, puffing of a snack.
  Contact Now
This method line is newly designed and produced with foreign places superior technology. it has improved the dangers of import device consisting of massive funding and excessive production cost. this line uses corn starch, wheat flour, potato starch as substances to supply"bugles", "internet", "potato chips" and masses of different three-d compound extrusion food. this line may be in comparison with those import equipments. underneath the identical features, its rate is best one 10th of that of import gadget.
  Contact Now
This puff snack making machine can use corn, rice, and other grain powder as raw substances to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very famous in the marketplace. this puff snack machine is characteristics of easy opeation, reasonable shape, low intake, and excessive performance, which make it the nice choice for medium production unit.Schematic diagram of production line
  Contact Now
OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.
  Contact Now
This approach line is newly designed and produced with remote places advanced era. it has stepped forward the dangers of import tool which include large investment and excessive production price. this line uses corn starch, wheat flour, potato starch as materials to supply"bugles", "internet", "potato chips" and loads of various three-d compound extrusion food. this line can be in contrast with those import equipments. below the same features, its charge is fine one tenth of that of import gadget.
  Contact Now
This technique line is newly designed and produced with overseas superior generation. it has stepped forward the dangers of import system consisting of huge funding and excessive production value. this line makes use of corn starch, wheat flour, potato starch as substances to supply"bugles", "net", "potato chips" and plenty of different 3-D compound extrusion food. this line can be in comparison with the ones import equipments. beneath the same features, its fee is only one 10th of that of import equipment.
  Contact Now
The product of the utility model is an extrusion type food puffing machine to solve the technical problem that the existing extrusion type food puffing machine has poor puffing effect on food.This extrusion type food puffing machine includes extrusion type food puffing equipment and a decompression module, and the decompression module is arranged at a matching position at the puffing outlet of the extrusion type food puffing equipment, so that the air pressure at the puffing outlet is lower than the environment air pressure.First of all, the decompression module includes ventilation equipment,
  Contact Now
Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance.   technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70~80㎏/hDimensions: 1700×1000×1800mm
  Contact Now
This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.
  Contact Now
  The nutritional powder production line developed by our company is another new extension of the twin screw extrusion technology. The traditional manual frying method for nutritional powder is inefficient, and hygiene and quality issues are difficult to control, resulting in a single processing material. Twin screw extrusion technology makes up for the above shortcomings. It can process a wide range of raw materials, including Rice noodles, corn flour, soybean flour, buckwheat flour, etc.
  Contact Now
Crumb is especially used for fried beefsteak and bird as frying dressing. this line is in particular designed and developed to perform from the cloth to final shaping automatically with less manpower, without waste,lower production fee, and higher production efficiency.
  Contact Now
  The nutritional powder production line developed by our company is a new extension and application of twin-screw extrusion technology. The traditional manual frying method for nutritional powder has low efficiency, hygiene, and quality issues that are difficult to control, resulting in a single processing material. Twin screw extrusion technology makes up for the above shortcomings. It can process a wide range of raw materials, including Rice noodles, corn flour, soybean flour, buckwheat, oats, etc. This production line can also add various nutrients such as vitamins, proteins, etc.
  Contact Now
Breadcrumb is specifically used for fried beefsteak and bird as frying dressing. this line is specially designed and evolved to perform from the fabric to very last shaping robotically with much less manpower, with out waste,lower production price, and better manufacturing performance.
  Contact Now
  The fried wheat flour snack production line is another new expanded application of twin screw extrusion technology. This production line integrates raw material mixing, steaming, ripening, puffing, shaping, frying, and seasoning, without the need for a boiler. The production process is simplified, efficient, and environmentally friendly. The raw materials required for production can be either single Rice noodles, flour, corn flour, corn flour and other materials, or mixed materials.
  Contact Now
      The fried wheat flour snack production line is a new technology that replaces traditional cooking Guoba production with twin screw extrusion technology. This production line is a high-quality production line that has been successfully developed and innovated by the company's scientific and technological personnel. It integrates raw material mixing, steaming, ripening, puffing, forming, frying, and seasoning. The production process is simplified, efficient, and environmentally friendly.
  Contact Now
Equipment introductionThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, conveying, oil filtering and seasoning, and the control is accurate and reliable. The equipment is frying while conveying, with strong continuous production without interruption, which greatly improves production efficiency and saves a lot of human resources. Frying oil turnover rate is high.
  Contact Now
Equipment introductionSLG35-A twin-screw extrusion puffing tester is a puffed food equipment suitable for research, teaching and formula research and development, which is developed by using advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years. The characteristics of the equipment are: the screw has self-cleaning function, high efficiency of material pushing, and good shearing and homogenizing effect of material.
  Contact Now
Slanty Snacks Making Machine uses potato starch, corn starch as main materials to produce a variety of twice extrusion food in different shapes which are popular in the market, such as crispy pea, shell, screw, square tube, round tube, wave, etc. This process line is characterized by unique technics, rational configuration, high automation and stable performance. It can finish steaming, extruding and shaping in one step without a boiler.
  Contact Now
Relate News
At present, European and American countries have become leaders in the research on cereal breakfast food. Countries have carried out research based on local eating habits and tastes of groups to form a system of cereal breakfast food products tailored to local conditions. The extrusion technology in my country is mainly concentrated in the field of puffed food and tissue protein, and the research on the production of cereal breakfast food by extrusion technology is relatively weak, and it can be said that it is still in its infancy.
Now puffed food has always been very popular, and many companies and businessmen have seen the profits. In fact, puffed food machinery is the same as food machinery, not only to meet the production conditions that the machinery and equipment should have, but also to meet the various conditions required for food processing. Judging from the current development phenomenon, the procurement of extrusion and puffing machinery should be considered from four aspects.1. Scale applicability.
Working principle: The raw materials are cooked in the extruder and pushed through the template when the temperature is lower than 100°C, and the raw material dough is formed at a low temperature, which can prevent the moisture in the material from instantly turning into steam and causing puffing. The puffing process of the product is mainly completed by baking or frying after extrusion. In this process, after the raw materials pass through the extruder, the raw materials are only matured and semi-cured, and the product is given a certain shape.
Materials with a certain moisture content and starch content are pushed by the screw in the sleeve of the extruder and reversely blocked by the discharge die (or throttling device in the sleeve), as well as by external pressure. Heating, or the heating effect of the frictional heat between the material and the screw, the material and the material, and the material and the inside of the sleeve, makes the material in a state of high pressure as high as 3-8MPa and a high temperature of about 200°C.
The screw extruder was first used in the plastics industry, and its theoretical research started earlier, forming a variety of mathematical models used to describe the basic principles of flow and heat transfer in the extrusion process, using these models to achieve accurate extrusion machine simulation Design. The application of extrusion technology in the food industry is slightly later than that in the plastics industry, which is mainly due to the complexity of food raw materials.
In the process of using the frying machine, there are some things that we need to pay attention to. This also has a certain role. Each type of frying machine can bring different inspiration to us architects. They use these inspiration to create different frying machines., Make our understanding will be further!Before using the equipment, it is clear that the products to be produced are pasta series, bean products or puffed foods. Different product production processes are different, so this needs to be considered in advance.
At the end of the extrusion cavity, the molten material is extruded through the die hole of the template under the action of high pressure. Due to the sudden drop in pressure, the water vapor expands and dissipates rapidly, making the product form a porous structure, and then the expanded material is extruded The rotary knife cuts the product to a certain size.
After pre -processing the materials are crushed, wet, mixed, and preheated, the driving force of the squeezing screw is used to form a specially designed mold hole to form a certain shape and organizational state, which is called extrusion processing.The basic principle of squeezing and puffed is: grain raw materials containing a certain amount of water, sealed in the patch machine, for heating, pressurizing or mechanical effects, so that the material is in a high temperature and high pressure state.
1. The food extruder improves the material processing characteristics.Extrusion has a great influence on the physical and chemical properties of materials. After the material is extruded and expanded, its expansion force increases, its water holding capacity is improved, its solubility is greatly improved, and its specific surface area is increased. The change of physical and chemical properties also greatly improves the processing characteristics of materials.2.
Extrusion technology, as an economical and efficient processing method, has been widely used in food and feed industry in recent years. The twin screw extruder has incomparable advantages over the single screw extruder. Its advantages such as wide processing range, high curing, strong self-cleaning ability and stable operation control are gradually recognized by everyone. For the food industry with high requirements, these advantages of twin screw extruder can be better played.